6061 Aluminium 3in x 5in Rosin Plates Set with heaters Controller Heavy Duty Rosin Press KIT dual controller cartridge heaters

The biggest problem with pressing rosin is the cost of equipment. Unless your willing to squeeze out tiny amounts of resin using a hair straightener, your going to have to spend a few bucks. I have seen a lot of great machines go for thousands of dollars, but spending that much wouldn`t make sense unless your running a business.

If your are interested in producing some good rosin at great yield your going to need two things:

High pressure – at least 500lb to 1,000lb ( 2+ tons preferred )
Heat – 150°F to 350°F ( 200°F preferred )

 

When Pressing rosin, less heat is needed at higher pressures, meaning you can almost cold press rosin, if you have the right equipment. But, lets stick to the script here. I`m about to show you how you can make your own DIY Rosin Press for less than $500.

Thats right, a press that can dish out 12,000lb of pressure with temperature controls for the most yields! Best of all, it only takes a couple of minutes to set up and use.

Let`s face it, pressing Rosin is the best way to squeeze out all the juices from cannabis. By using heat and pressure to extract resin from the herb (plant matter), anyone can yield some high quality resin.

The biggest problem with pressing rosin is the cost of equipment. Unless your willing to squeeze out tiny amounts ofresin using a hair straightener, your going to have to spend a few bucks. I have seen a lot of great machines go for thousands of dollars, but spending that much wouldn`t make sense unless your running a business.

If your are interested in producing some good rosin at great yield your going to need two things:

High pressure– at least 500lb to 1,000lb ( 2+ tons preferred )
Heat– 150°F to 350°F ( 200°F preferred )
1The finished product, check images below for links.
When Pressing rosin, less heat is needed at higher pressures, meaning you can almost cold press rosin, if you have the right equipment. But, lets stick to the script here. I`m about to show youhow you can make your own DIY Rosin Press for less than $500.
Thats right, a press that can dish out 12,000lb of pressure with temperature controls for the most yields! Best of all, it only takes a couple of minutes to set up and use.

DIY Rosin Rig

To build this rig all you need is two simple products:

Double Rosin Press Plates Kit Heavy Duty Dual Controller Box with Wired Heating Rod

6-Ton Hydraulic Shop Floor Press with Press Plates and H Frame

If your not in complete shock yet, lets go over the details for both. Also the best method forprepressing rosin cookiesfor higherterpenoidyields.

The Hydraulic Press

2

A powerful six ton press housed in a solid H-frame. Super strong and simple construction thats easy to set. The side rails have holes that allow you to adjust the working space. It also includes 2 press plates, use them! They will protect your heating plates. With a total weight of 60lb, you can safely crank out6 tons of pressure,way more than you will need.

Heat Controlled Press Plates

3

0°F to 415°F in minutes!, These heavy duty plates can generate more that enough heat and withstand up to 8000psi. Best of all, the plates are heated to the right temperature with an electronic control box! You don`t have to jerk around with boiling plates, or using a blow torch like some other presses.

If you have ever pressed rosin before, you should have a pretty good idea of what to do and how easy this is to use. Building your own press will save you a ton of cash and work as well if not better than other presses that are double the price.

1.Plug and play 5″x3″ platen set up. We use 6061 aluminum because it is light, strong, and has excellent heat transfer, causing no hot spots!

2.Dual heated plates, both sharing a single heat zone.This is a tried, tested, and proven design with excellent results in hundreds of instances. We’ve tested both extensively, with no better yield or quality on the dual controller.

3.Fully accurate temperature monitoring from 0-300F comfortably. Our heat sensor drills directly into the plates, giving you the exact true platen temperature.

5.Made to fit any hydraulic press up to 20 tons with a 2″ diameter ram or less.

Mounting our plates to your press of choice is as simple as tightening two set screws (hex keys included) onto the ram. Setup takes less than 5 minutes!

6.Reach your desired temperature in less than 10 minutes with our powerful 500w cartridge heating elements.

7.The Plates can pay for themselves within the first few hours of usage!

This kit includes:

2pcs 6061 Aluminum Blocks

Digital controller wired to two 500w cartridge heating elements

Hex key to mount your plates to your press of choice

One Year Full Warranty on your electronics


Post time: May-17-2018


Connect

Give Us A Shout
Get Email Updates
WhatsApp Online Chat !